180 Pcs/Min 4 Color Flexo Printing Slotting Machine From Yike Group
Feeder Unit
►Lead-edge Feeding System
- Lead-edge suction feeding system, easy operation, high accuracy,(adopts lead feeder system).
- 7.5KW high pressure centrifugal fans, according to the cardboard warping degree of frequency control pressure, to ensure warp cardboard or thin cardboard high-speed accurate transmission.
- Left and right side baffle position electrically adjustable, screw-driven.and can remember by computer.
- Front baffle adjust the position of the upper and lower intervals synchronization by manual.
Printer Unit
►Printing Roller
- With printing plate,outer diameter φ420mm
- High quality steel production, surface grinded, hard chromium-plated. Static balance adjustment, stable operation, suitable for high speed running
- Roller horizontal direction and circumferential direction with datum line, convenient for align plate
- Fixed coil axis, suitable for standard hanging slats, realize rapid change plate
- Electric 360° adjust printing roller, automatic digital display adjustment,remember store digital.
Die Cutting Unit
► Operation
- Automatic detachment of the stencil roll and the UNIFLEX roller through the cylinder eccentric device in the non-die cutting condition can reduce the no-load load of the machine and extend the life of the Glue and die.
- The phase adjustment of the planetary structure, 360-degree operation, stop, both positive and negative operation, phase accuracy can reach 0.10mm to facilitate the version, the version of the operation.
- 7-inch color touch screen and PLC phase control make the operation more convenient, intuitive and accurate.
- spline transmission, to overcome the mechanical wear of gear transmission, excellent force roller to move 40 mm left and right, and equipped with radial differential device, can make the average wear of the rubber roller greatly improve the life of the rubber roller.
- The machine is equipped with an excellent glue correction device, which can be used after repeated corrections to the rubber roller.
- The gap of die-cutting roller is manually adjusted, and the adjustment range is 1-10mm. The cross-slider is used to connect, adopting the double-level aluminum alloy die-casting and decelerating device to adjust and adjust the precision and labor saving. After the adjustment, it is automatically locked to ensure the printing quality. The gears use cross slides for keyless connection, ensuring the correct meshing position of the transmission gear when adjusting the clearance.
