Electric Mill Roll Stand Single Facer Line For 2 Ply Corrugated Cardboard Sheets
- YK-SF-280 Single Facer Line ( Without Stacker )
1 set electric mill roll stand
1 set 280S single facer ( Option see below )
1 set NC computer sheet cutter
Design speed: 80m/min
Working speed: 40m/min
Available width: 1400,1600,1800mm
1) Electric Mill Roll Stand
- Maximum paper roll diameter: 1800mm
- Maximum support weight: 2T
- Round-plate type manual brake, the web tension is adjusted at any time.
- Arm clamp and rotary structure set fixed torque clutch, operate safety.
- The structure is double rotary shaft with four arms, support two paper mill rolls on both arms at the same time.
2) SF-280S Single Facer
- Cover vacuum suction.
- Corrugating roll is made of high quality alloy steel 48CrMo, the surface is medium-frequency quenched and chrome-plated. Hardness can reach HRC55~60, which ensures good wear-resistance and long life service.
- No gear transmission.
- Glue roll is lifted and lowered pneumatically.
- Independent glue clean device and electric glue-separate board to control the width of glue.
- Lubricated by high temperature lubricate grease.
- Surface of all dancing rolls and preheating rolls is grinded and chrome-plated.
- Pressure roll is medium- frequency quenched and chrome-plated.
- Preheating rolls, pressure rolls and corrugating rolls all meet the National Standard of Pressure Vessel.
3) NC Computer Sheet Cutter
- Rational mechanical structure, strong form, good stability , have long performance life.
- All operation control on the same side, easy to operate.
- Max feeding paper : 1600mm
- With four set slitter knives, crosscut 400mm-2400mm.
- Cut paper precision±2.5mm.
- Slice paper number of times: 20-120/min
- Working speed : 40-70 m/min
- Weight : 1.7 tons
- Specification For Single Facer Line
| Working Width | 1400mm | 1600mm | 1800mm | |
| Heating Method | Electrical heating/Oil heating / Steam heating |
| Design Speed | 100-120m/min |
| Economical Speed | 80-100 m/min |
| Compress-air Pressure | 0.4-0.9MPa |
| Flute Type | Standard flute | UV Flute |
| Single Facer Line | Standard spec. | A,B,C,E,F |
| | For other type and model, we can produce as customer’s requirement. |
Option 1 for Single Facer -- SF-280A
Option 2 for Mill Roll Stand -- Hydraulic Mill Roll Stand
Option 3 for NC Sheet Cutter with Stacker
