CHINA YIKE GROUP CO.,LTD
CHINA YIKE GROUP CO.,LTD Corrugated carton box machine manufacturer Anna@yikegroup.net 008613363699514
Add to Cart
Woven Type Corrugator Belts With Flocking Seam For Double Facer Machine
1. Introduction
Corrugator belt also named Corrugated board conveyor belt.
Corrugator belt is for corrugated board production line and developed specifically for Double Facer.
2. Corrugator Belt Seam
1: USA Fastener clipper With Rubber
2: Hot Jaw Lacing
3.Technical Specifications
| Type | YKC-Common edge | YKK-Kevlar edge |
| Thickness | (9±0.30)mm | |
| Width | (1600-2800)mm | |
| Heat-resistance | 240ºC | 240℃ (Kevlar Edge part up to) 350℃ |
| Tensile strength | 75Mpa | |
| Coefficient of friction | ≥0.4u | |
| Weight per unit | (7.5 ± 0.3)kg/m2 | |
| Air-permeability | 2.2m3/m2min. | |
4. Products Features
| Tensile strength | Warp direction (63-75) Mpa in dry mode |
| Heat resistance | Raw materials are polyester synthetic fiber, softening point≥260ºC |
| Moisture absorption | Quick absorption and emission of heat, therefore cardboard can be quickly dried |
| Seams | Belt seam part is fabricated with imported steel fasteners and filled with rubber, flat surface, heat- resistance, fastness and non-marking |
| Suitability | Suitable for BHS, JS, TCY, CHAMPION, YIKE GROUP, FOSBER corrugators, various cardboards and some particular operation mode. |
| Geometrical dimension | Steady belt dimension, high weaving density, low stretching and contraction and good contact between belt surface and cardboard. |
| Service life | As long as the same products imported abroad. |
CHINA YIKE GROUP CO.,LTD
Email: anna@yikegroup.net
Whatsapp: +8613363699514